GW13-15 Isolating Switch

The disconnect switch / isolating switch with manual operation mechanism is used for sectionalizing or isolating circuits on outdoor distribution overhead systems up to 38KV.
Caractéristique
Voltage: 12 / 36kV
Current: 400 / 630A
Application: Overhead Distribution Line
Standard: IEC 62271-102

Demander un devis

Vue d'ensemble

Medium-voltage isolating switch

GW13-15 Isolating Switch for Medium-Voltage Distribution Isolation

GW13-15 Isolating Switch is a medium-voltage isolating switch for outdoor distribution isolation. The supplier table lists 12 / 36 kV rated-voltage options, 400 / 630 A rated-current options and 16(for 400A)/ 20(for 630A) kA rated short-circuit withstand current.

Tension nominale: 12 / 36 kV
Courant assigné: 400 / 630 A
Short-circuit withstand: 16(for 400A)/ 20(for 630A) kA
Impulse withstand: 95 / 170 kV

The supplier source lists IEC 62271-102:2001. Confirm the required standard edition, test documents and project acceptance scope before ordering.

Demander une révision de la configuration Browse isolating switches

Published technical data

GW13-15 Isolating Switch Technical Parameters

The table below is transcribed from the target model’s authenticated WordPress source. Confirm the selected voltage, current, withstand level and accessory combination in the RFQ.

Paramètre	Published value	Unité
Rated voltage of Disconnector	12 / 36	kV
Courant assigné	400 / 630	A
Fréquence assignée	50	Hz
Lighting Impulse withstand voltage	95 / 170	kV
Power frequency withstand voltage in 1 min (Dry)	42 / 70	kV
Power frequency withstand voltage in 10 s (Wet)	36 / 60	kV
Rated short circuit withstand current	16(for 400A)/ 20(for 630A)	kA
Rated short circuit withstand time	3	s
Rated peak withstand current	40(for 400A)/ 50(for 630A)	kA
Creepage	25 / 20	mm/kV
Blade stopped degree in opening position	90	Degree
Pièces de rechange
Mounting bracket	with/without
Terminal clamp	with/without
Loadbuster Hook	with/without
Self locking Mechanism	with
Material
Terminal pads	Brass/Copper plated by silver
Blade	Copper plated by siliver
Insulator	Porcelain / Polymer
Channel Base	Steel hot galvanized
Operating eye	Brass
Package
Qty/package	1	pc/carton
Service conditions
Environment maximum temperature	40	°C
Pollution level	Heavy
Altitude	≤1000	Meter
Standard	IEC 62271-102:2001

Published source values include 50 Hz, 20 mm, 2001. Confirm the exact row and unit in the original technical table when preparing the RFQ.

Confirm system voltage, earthing arrangement, installation altitude, pollution level and required operating duty with the project engineer before final selection.

Liste de contrôle de sélection

Prepare the Isolating-Switch RFQ

Define the system voltage. State nominal system voltage, rated voltage and insulation-coordination values.
Match continuous and short-time duty. Confirm rated current, short-circuit withstand current, peak withstand current and duration.
Choose the arrangement. Identify single-pole or three-pole construction, operating mechanism and rod length where applicable.
Specify installation hardware. Confirm mounting bracket, terminal clamp, line connection, operating eye and crossarm arrangement.
List documents and quantity. Include standard edition, drawings, test evidence, packing quantity, destination and required delivery schedule for quotation.

Configuration and supply boundary

Review the GW13-15 Configuration

The target source lists selectable hardware and material options. State each option explicitly so the quotation reflects the intended field installation.

Electrical coordination

Confirm rated voltage, current, impulse withstand, power-frequency withstand and leakage distance against the project study.

Operating hardware

Depending on the model, specify operating mechanism, arcing-distinguishing chamber, operating rod length, loadbuster hook or self-locking mechanism.

Materials and corrosion protection

The source lists silver-plated copper terminals and blades, porcelain or polymer insulators and hot-galvanized steel bases. Confirm the selected combination.

Commercial boundary

Quantity, packaging, delivery schedule, private label and project documents remain subject to technical review and quotation.

Taille de l'entreprise

Fuerte en un clin d'œil

FUERTE indique 1985 comme année de fondation, plus de 220 employés et une superficie bâtie de 36 000 m². Ces chiffres publiés par le fournisseur fournissent un contexte pour la fabrication et le support de projets.

1985

Fondée en

Supplier-published company history

220+

Employés

Published workforce scale

36,000 m²

Zone bâtie

Published manufacturing footprint

OEM

et support ODM

Subject to technical review

Capacité OEM & ODM

Custom Support for Isolating-Switch Projects

FUERTE’s published OEM and ODM scope includes voltage/current adaptation, mounting hardware, nameplates, packaging and shipping marks.

Electrical configurationReview rated voltage, current, withstand values and service conditions for the target market.
Hardware selectionConfirm poles, operating mechanism, rod length, brackets, terminals and corrosion-resistant materials.
Project documentationState drawings, marking, packing, shipping marks and acceptance-document requirements before quotation.

Foire aux questions

GW13-15 Isolating Switch FAQ

Which voltage and current values are published?

The target table lists 12 / 36 kV rated-voltage options and 400 / 630 A rated-current options. Confirm the exact configuration in the quotation.

What withstand values should be checked?

Review impulse withstand, power-frequency withstand, short-circuit withstand current and peak withstand current together with the insulation-coordination study.

Can the operating hardware be customized?

The source lists selectable mechanisms, brackets, terminals and, for some models, operating-rod length. Availability depends on technical review.

Que doit contenir une demande de devis ?

State model, poles, voltage, current, withstand duty, operating hardware, mounting arrangement, quantity, destination market and required documents.

Examen de la configuration

Send the GW13-15 Requirements

Provide system voltage, rated current, short-circuit duty, insulation levels, pole arrangement, operating hardware, mounting details, quantity, destination market and required documents.

Accéder au formulaire de devis