ZW20-12/630-20 Vacuum Circuit Breaker

Permintaan Penawaran

Ringkasan

Pemutus sirkuit vakum

ZW20-12/630-20 Vacuum Circuit Breaker for Medium-Voltage Switching

ZW20-12/630-20 Vacuum Circuit Breaker is presented for medium-voltage switching and protection projects. The authenticated supplier source provides product-specific construction notes and technical rows where published; use the exact model and installation duty for final selection.

Product family: Vacuum switching
Installation duty: Medium voltage
Model reference: ZW20-12/630-20
Final rating: Confirm by drawing

The page keeps the supplier’s model identity and source tables where available. Confirm the applicable IEC/GB standard, rated voltage, current, breaking capacity and project acceptance documents before ordering.

Permintaan tinjauan konfigurasi Browse vacuum circuit breakers

Published technical data

ZW20-12/630-20 Vacuum Circuit Breaker Technical Parameters

Use the source data below as the starting point for engineering review. Keep voltage class, continuous current, short-circuit duty, operating mechanism and installation environment together when selecting a breaker.

Published source table 1

No	Descriptions		unit	Standard parameter values
1.1	Pemutus Sirkuit Vakum
1.1.1	Model No			ZW20-12
1.1.2	Switching structure	Transformer form		External or internal
		Insulating Material		A:Epoxy resin outsourced silicone rubber
		Insulating Material		B:Outdoor epoxy resin
1.1.3	Insulating and extinguishing media			SF6, Vacuum
1.1.4	Rated Voltage		kV	12
1.1.5	Rated Current		A	630
1.1.6	Rated cable charging and breaking current		A	20
1.1.7	Rated short-circuit breaking current		kA	12.5, 16, 20
1.1.8	Temperature rise test current			1.1Ir
1.1.9	Rated frequency 1 min withstand voltage	To earth/Between	kV	42
1.1.9	Rated frequency 1 min withstand voltage	Across the base	kV	48
1.1.10	Rated lightning impulse withstand voltage(1.2/50μs)Peak value	To earth/Between	kV	75
1.1.10		Across the base	kV	85
1.1.11	Rated short-time withstand current and duration		kA/s	20/3
1.1.12	Rated peak withstand current		kA	50
1.1.13	Rated short-circuit breaking current		kA	20
1.1.14	Rated short-circuit closing current		kA	50
1.1.15	Main circuit resistance		μΩ	80
1.1.16	Mechanical stability		times	≥10000 No load
1.1.17	Minimum creepage distance for external insulation		mm	372
1.1.18	Rated short-circuit breaking current breaking times		times	≥30times
1.1.19	Closing and opening not synchronized		ms	≤2
1.1.20	Contact closing bounce time		ms	≤2
1.1.21	Partial discharge（1.1Ur）		pC	≤20
1.2	Operating Mechanism
1.2.1	Type or model of actuator			Spring or permanent magnet mechanism
1.2.2	Operating Method			Motorized with manual operation
1.2.3	Motor Voltage		V	Conventional DC220
1.2.4	Auxiliary contact capacity			DC24V、10A
1.2.5	DC resistance of telecommunication circuit			After 100times operations＜1Ω
1.3	Transformer combination mode			Includes current transformers, electronic zero sequence voltage transformers, and electromagnetic voltage transformers or other models..
1.4	Current Transformer
1.4.1	Rated current ratio			(1) Phase current: 600A/5A (2) Zero sequence current: 100A/1A
1.4.2	Accuracy Level			(1) phase current: protection class 5P10 (2) Zero sequence current: use 100A/1A Protection Class 10P30.
1.4.3	Implementation method			Electromagnetic
1.4.4	Temperature range			-40℃～70℃
1.5	Electromagnetic voltage transformers
1.5.1	Rated Voltage Ratio			Zero sequence voltage: (10kV/)/( 6.5V/3)
1.5.2	Accuracy Level			Zero sequence voltage: 3P level
1.5.3	Temperature range			-40℃~70℃
1.5.4	Partial discharge		Pc	≤20 (1.1Um)
1.5.5	Load Impedance			≥2MΩ
1.6	Electromagnetic voltage transformers (external)
1.6.1	Quantities		Pc	1 or 2 optional
1.6.2	Rated Voltage Ratio			Line voltage measurement: 10kV/0.1kV Supply voltage: 10kV/0.22kV
1.6.3	Accuracy level			Measuring voltage winding: 0.5 level Supply voltage winding: 3 levels
1.6.4	Capacity (VA)			Measuring voltage winding: ≥10VA Supply voltage winding: long-term capacity ≥ 50VA, short-time capacity ≥ 300VA/30s
1.7	Mechanical property
1.7.1	contact opening distance		mm	9±1
1.7.2	contact overtravel		mm	3.5±0.5
1.7.3	Average closing speed		m/s	0.4-0.8
1.7.4	Average gate opening speed		m/s	1.0-1.4
1.7.5	Closing time		mm	≤60
1.7.6	Split time		Ms	≤ 45
1.7.7	Closing Bounce Time		Ms	≤2
1.7.8	Three-phase switching non-synchronous		Ms	≤2
1.7.9	Interphase center distance		mm	280 ±1.5
1.8	Enclosure protection class			Not less than IP65
1.10	Box Material			304 or hot rolled steel	Support for surface treatment
1.11	Secondary equipment
1.11.1	Intelligent Control Terminal			Support remote local, three protection, three remote, reclosing, SOE, can also be equipped with the statute of the communication connection backstage real-time monitoring, adjusting, issuing fixed value and other configurations, other requirements to inform when ordering	One or two times are connected by aviation plug-in, without external wiring.

Values shown are transcribed from the target listing where the authenticated source publishes them. Confirm the exact model row, unit, test condition and revision before using any value in a purchase specification.

Checklist seleksi

Specify the Vacuum Circuit Breaker for the Network

Define the electrical duty. State rated voltage, continuous current, frequency, short-circuit breaking current, making current and insulation levels.
Choose the construction. Confirm outdoor or indoor installation, common-box or pole-mounted arrangement, vacuum interrupter and insulation medium.
Match the operating mechanism. Specify manual, motor or stored-energy operation, trip/close coil voltage, auxiliary contacts and control interface.
Check the site environment. Provide altitude, ambient temperature, humidity, pollution, wind, seismic and enclosure requirements.
List documents and quantity. Include drawings, wiring diagram, routine-test evidence, packing, destination market and delivery requirements in the RFQ.

Configuration and supply boundary

Review the ZW20-12/630-20 Configuration

The supplier listing identifies a vacuum-circuit-breaker model family. State the exact model code and switching arrangement so the quotation does not mix ratings or accessories from another series.

Electrical parameters

Confirm rated voltage, current, frequency, short-circuit duty, insulation levels and operating sequence.

Mechanism and controls

Specify stored-energy mechanism, motor and coil voltages, auxiliary contacts, interlocks and local/remote control.

Structure and environment

Confirm pole arrangement, insulation housing, enclosure, altitude, temperature, pollution and installation interface.

Commercial boundary

Quantity, packing, delivery schedule, private label and project documents remain subject to technical review and quotation.

Bengkel produksi yang ditampilkan di FUERTE Tentang Kami

Lingkungan pengujian yang ditampilkan di FUERTE Tentang Kami

Skala perusahaan

Fuerte dalam Sekilas

FUERTE mencatat tahun pendiriannya sebagai tahun 1985, dengan 220+ karyawan dan area bangunan seluas 36.000 m². Angka-angka yang dipublikasikan oleh pemasok tersebut memberikan konteks terkait dengan manufaktur dan dukungan proyek.

Operasi pabrik
Pengujian & Inspeksi
Dukungan ekspor

1985

Didirikan pada

Supplier-published company history

220+

Karyawan

Published workforce scale

36,000 m²

Total luas bangunan

Published manufacturing footprint

OEM

& Dukungan ODM

Subject to technical review

Tentang FUERTE

Kemampuan OEM & ODM

Custom Support for Vacuum-Breaker Projects

FUERTE’s published OEM and ODM scope includes voltage/current adaptation, mounting hardware, nameplates, packaging and shipping marks.

Electrical configurationReview voltage class, current rating, insulation levels and service conditions.
Mechanical interfaceConfirm pole structure, operating mechanism, fittings and mounting dimensions.
Project documentationState drawings, wiring, marking, packing, shipping marks and acceptance-document requirements before quotation.

Pertanyaan yang sering diajukan

ZW20-12/630-20 Vacuum Circuit Breaker FAQ

Which values should be matched first?

Start with rated voltage, continuous current, short-circuit breaking capacity, insulation levels, operating sequence and installation environment.

Are ratings interchangeable between vacuum-breaker series?

No. Confirm the exact model code and source table. Do not transfer ratings, dimensions or accessories from a similar-looking series.

Can the controls and fittings be customized?

FUERTE publishes adaptation of mounting hardware and project specifications as an OEM/ODM scope. Availability depends on technical review.

Apa yang harus disertakan dalam permintaan penawaran?

State model, rated voltage, current, breaking duty, mechanism and coil voltages, mounting interface, quantity, destination and required documents.

Ulasan konfigurasi

Send the ZW20-12/630-20 Requirements

Provide rated voltage, current, breaking duty, insulation levels, mechanism, dimensions, mounting details, quantity, destination market and required documents.

Pergi ke formulir penawaran