Electrical coordination
Confirm rated voltage, MCOV, nominal discharge current and residual-voltage limits against the project study.
Стать партнером
Ищете надежного производственного партнера? Поможем вам масштабировать ваш бизнес.
Связаться с отделом продажСтать партнером
Ищете надежного производственного партнера? Поможем вам масштабировать ваш бизнес.
Связаться с отделом продажСтать партнером
Ищете надежного производственного партнера? Поможем вам масштабировать ваш бизнес.
Связаться с отделом продажСтать партнером
Ищете надежного производственного партнера? Поможем вам масштабировать ваш бизнес.
Связаться с отделом продажСтать партнером
Ищете надежного производственного партнера? Поможем вам масштабировать ваш бизнес.
Связаться с отделом продаж
Молниеотвод
Y5(10)C-11 Устройство защиты от перегрузок
- The surge arrester is assembled above overhead distribution transformers, where they shunt the energy from overvoltage events (especially lightning effects) to a ground connection and protect the equipment against damage in system.
- Характеристика:
- Voltage: 11kV
- Current: 5kA / 10kA
- Application: Overhead Distribution Line
- Standard: IEC60099-4
Обзор
Metal oxide surge arrester
Y5(10)C-11 Surge Arrester for Distribution Overvoltage Protection
The supplier table identifies Y5(10)C-11 as a 11 kV, 50 Hz, gapless Design B distribution-type surge arrester with 5 / 10 kA nominal discharge-current options and 9.4 kV maximum continuous operating voltage.
- Номинальное напряжение
- 11 kV
- Nominal discharge current
- 5 / 10 kA
- MCOV
- 9.4 kV
- Published standard
- IEC60099-4:2014
The source lists IEC60099-4:2014. Confirm the required standard edition, arrester class and project acceptance documents before ordering.
Published technical data
Y5(10)C-11 Technical Parameters
Review the published electrical characteristics together with the selectable accessories, material options, package information and service conditions.
| Электрические характеристики | Спецификация | Унита | |
|---|---|---|---|
| Rated voltage of Surge arrreser | 11 | kV | |
| Nominal discharge current | 5 | 10 | kA |
| Rated frequency | 50 | Hz | |
| Maximum continuous operating voltage | 9.4 | kV | |
| Steep current impulse residual voltage | 40 | kV(Crest) | |
| Lightning Impulse residual voltage | 33 | kV(Crest) | |
| Switching Impulse residual voltage | 30 | kV(Crest) | |
| Long duration current impulse
withstand voltage |
150 | 250 | A |
| High current impulses | 65 | 100 | kA (Crest) |
| Rated Short-circuit current | 20 / 12 / 6 / 0.6 ± 0.2 | kA | |
| Class of Surge arrester | Class 1 or Class 2 | ||
| Приложение | Distribution type | ||
| With or without gap | Gapless | ||
| Designation of arrester | Design B | ||
| Запасные части | |||
| NEMA A or B mounting bracket | с/без | ||
| Отключающий элемент | с/без | ||
| Earth lead | с/без | ||
| Bird guard cap | с/без | ||
| Line clamp | с/без | ||
| Upper terminal (incoming line) bolt size | M12 | ||
| Lower termina (outgoing line) bolt size | M10 | ||
| Материал | |||
| Upper terminal | Stainless steel 304 | ||
| Housing | Polymer type | ||
| Color of housing | Dark grey / light grey | ||
| Varistor | High quality zinc oxide varistor | ||
| Size of Varistor | 35mm / 38mm /40mm / 42mm | ||
| Пакет | |||
| Количество/пакет | 3 | ПК/бумага | |
| Условия обслуживания | |||
| Максимальная температура окружающей среды | 40 | ℃ | |
| Уровень загрязнения | Heavy | ||
| Высота | 1000 | Метр | |
| Стандартный | IEC60099-4:2014 | ||
Confirm the selected rating against the system voltage, earthing arrangement, insulation coordination, installation altitude and pollution conditions.
Список контрольных критериев отбора
Prepare the Surge Arrester RFQ
- State the system and arrester voltage. Include the nominal system voltage, arrester rated voltage and MCOV.
- Confirm discharge duty. Specify nominal discharge current, required residual-voltage limits and the project duty cycle.
- Define installation conditions. Include altitude, pollution level, maximum ambient temperature and mounting position.
- Select hardware and accessories. Confirm brackets, line clamps, earth leads, disconnectors, bird guards, counters or monitors.
- List document requirements. State the applicable standard edition, drawings, test evidence and acceptance documents required by the project.
Configuration and supply boundary
Review the Y5(10)C-11 Configuration
The supplier table lists a polymer housing, Grade 304 stainless steel upper terminal and zinc oxide varistor options sized 35mm / 38mm /40mm / 42mm.
Mounting hardware
State bracket pattern, terminal connection, line clamp and earth-lead requirements in the inquiry.
Failure indication
Confirm whether the supply should include a disconnector, insulating base, counter or monitor.
Commercial boundary
Quantity, packing, delivery schedule, test documents and destination requirements depend on quotation.
Масштаб компании
Fuerte в общих чертах
FUERTE называет 1985 год годом основания, 220+ сотрудников и площадь здания 36 000 м². Эти данные, опубликованные поставщиками, дают представление о масштабах производства и поддержки проектов.
- Операции на фабрике
- Тестирование и инспекция
- Поддержка экспорта
1985
Основанная в
Supplier-published company history
220+
Сотрудники
Published workforce scale
36,000 m²
Застроенная территория
Published manufacturing footprint
OEM
Поддержка ODM
Subject to technical review
Возможность разработки и производства под заказ
Custom Support for Arrester Projects
FUERTE’s published OEM and ODM scope includes voltage/current adaptation, mounting hardware, nameplates, packaging and shipping marks.
-
Electrical configurationReview rated voltage, MCOV, discharge current, residual voltage and service conditions.
-
Hardware selectionConfirm brackets, terminals, disconnectors, bird guards, counters and monitors.
-
Project documentationState drawing, marking, packing and acceptance-document requirements before quotation.
Часто задаваемые вопросы
Y5(10)C-11 Surge Arrester FAQ
What rated voltage and MCOV are published for Y5(10)C-11?
The table lists 11 kV rated voltage and 9.4 kV maximum continuous operating voltage.
What residual-voltage values are shown?
The published steep-current, lightning-impulse and switching-impulse residual voltages are 40 kV, 33 kV and 30 kV crest respectively.
Is the arrester gapped or gapless?
The source identifies the product as a gapless, Design B, distribution-type arrester.
What should the RFQ include?
State the system voltage, MCOV, nominal discharge current, residual-voltage limits, short-circuit requirement, mounting hardware, disconnector, terminal sizes, quantity and destination market.
Обзор конфигурации
Send the Y5(10)C-11 Requirements
Provide system voltage, arrester rated voltage, MCOV, nominal discharge current, residual-voltage limits, mounting and accessory requirements, quantity, destination market and required documents.
Связанные продукты
Запросите индивидуальную смету
Интересует этот товар? Заполните форму ниже, и наш продакт-менеджмент свяжется с вами в течение 24 часов.
Готовы обсудить требования к вашему проекту?
Пожалуйста, оставляйте сообщения для консультации. Мы предложим вам больше вариантов обслуживания.