GW13-36 Isolating Switch

The disconnect switch / isolating switch with manual operation mechanism is used for sectionalizing or isolating circuits on outdoor distribution overhead systems up to 38KV.
Ciri-ciri:
Voltage: 12 / 36kV
Current: 630A
Aplikasi: Jalur Distribusi Atas Atas
Standard: IEC 62271-102

Permintaan Penawaran

Ringkasan

Medium-voltage isolating switch

GW13-36 Isolating Switch for Medium-Voltage Distribution Isolation

GW13-36 Isolating Switch is a medium-voltage isolating switch for outdoor distribution isolation. The supplier table lists 12 / 36 kV rated-voltage options, 630 A rated-current options and 20 kA rated short-circuit withstand current.

Voltan yang diukur: 12 / 36 kV
Nilai arus: 630 A
Short-circuit withstand: 20 kA
Impulse withstand: 95 / 170 kV

The supplier source lists IEC 62271-102:2001. Confirm the required standard edition, test documents and project acceptance scope before ordering.

Permintaan tinjauan konfigurasi Browse isolating switches

Published technical data

GW13-36 Isolating Switch Technical Parameters

The table below is transcribed from the target model’s authenticated WordPress source. Confirm the selected voltage, current, withstand level and accessory combination in the RFQ.

Karakteristik listrik	Spesifikasi		Unit
Rated voltage of Disconnector	12	36	kV
Nilai arus	630		A
Rated frequency	50		Hz
Lighting Impulse withstand voltage	95	170	kV
Power frequency withstand voltage in 1 min (Dry)	42	70	kV
Power frequency withstand voltage in 10 s (Wet)	36	60	kV
Rated short circuit withstand current	20		kA
Rated short circuit withstand time	3		s
Rated peak withstand current	50		kA
Creepage	25	20	mm/kV
Blade stopped degree in opening position	160		Degree

Suku cadang
Bracket pemasangan	dengan/tanpa
Terminal clamp	dengan/tanpa
Loadbuster Hook	dengan/tanpa
Self locking Mechanism	with

Bahan
Terminal pads	Brass/Copper plated by silver
Blade	Copper plated by siliver
Insulator	Porcelain / Polymer
Channel Base	Steel hot galvanized
Channel Base	Steel hot galvanized

Paket
Jumlah/paket	1		PC/karton

Syarat-syarat layanan
Suhu maksimum lingkungan	40		°C
Tingkat polusi	Heavy
Ketinggian	≤1000		Meter

Standard	IEC 62271-102:2001

Published source values include 50 Hz, 20 mm, 2001. Confirm the exact row and unit in the original technical table when preparing the RFQ.

Confirm system voltage, earthing arrangement, installation altitude, pollution level and required operating duty with the project engineer before final selection.

Checklist seleksi

Prepare the Isolating-Switch RFQ

Define the system voltage. State nominal system voltage, rated voltage and insulation-coordination values.
Match continuous and short-time duty. Confirm rated current, short-circuit withstand current, peak withstand current and duration.
Choose the arrangement. Identify single-pole or three-pole construction, operating mechanism and rod length where applicable.
Specify installation hardware. Confirm mounting bracket, terminal clamp, line connection, operating eye and crossarm arrangement.
List documents and quantity. Include standard edition, drawings, test evidence, packing quantity, destination and required delivery schedule for quotation.

Configuration and supply boundary

Review the GW13-36 Configuration

The target source lists selectable hardware and material options. State each option explicitly so the quotation reflects the intended field installation.

Electrical coordination

Confirm rated voltage, current, impulse withstand, power-frequency withstand and leakage distance against the project study.

Operating hardware

Depending on the model, specify operating mechanism, arcing-distinguishing chamber, operating rod length, loadbuster hook or self-locking mechanism.

Materials and corrosion protection

The source lists silver-plated copper terminals and blades, porcelain or polymer insulators and hot-galvanized steel bases. Confirm the selected combination.

Commercial boundary

Quantity, packaging, delivery schedule, private label and project documents remain subject to technical review and quotation.

Bengkel produksi yang ditampilkan di FUERTE Tentang Kami

Lingkungan pengujian yang ditampilkan di FUERTE Tentang Kami

Skala perusahaan

Fuerte dalam Sekilas

FUERTE mencatat tahun pendiriannya sebagai tahun 1985, dengan 220+ karyawan dan area bangunan seluas 36.000 m². Angka-angka yang dipublikasikan oleh pemasok tersebut memberikan konteks terkait dengan manufaktur dan dukungan proyek.

Operasi pabrik
Pengujian & Inspeksi
Dukungan ekspor

1985

Didirikan pada

Supplier-published company history

220+

Karyawan

Published workforce scale

36,000 m²

Total luas bangunan

Published manufacturing footprint

OEM

& Dukungan ODM

Subject to technical review

Tentang FUERTE

Kemampuan OEM & ODM

Custom Support for Isolating-Switch Projects

FUERTE’s published OEM and ODM scope includes voltage/current adaptation, mounting hardware, nameplates, packaging and shipping marks.

Electrical configurationReview rated voltage, current, withstand values and service conditions for the target market.
Hardware selectionConfirm poles, operating mechanism, rod length, brackets, terminals and corrosion-resistant materials.
Project documentationState drawings, marking, packing, shipping marks and acceptance-document requirements before quotation.

Pertanyaan yang sering diajukan

GW13-36 Isolating Switch FAQ

Which voltage and current values are published?

The target table lists 12 / 36 kV rated-voltage options and 630 A rated-current options. Confirm the exact configuration in the quotation.

What withstand values should be checked?

Review impulse withstand, power-frequency withstand, short-circuit withstand current and peak withstand current together with the insulation-coordination study.

Can the operating hardware be customized?

The source lists selectable mechanisms, brackets, terminals and, for some models, operating-rod length. Availability depends on technical review.

Apa yang harus disertakan dalam permintaan penawaran?

State model, poles, voltage, current, withstand duty, operating hardware, mounting arrangement, quantity, destination market and required documents.

Ulasan konfigurasi

Send the GW13-36 Requirements

Provide system voltage, rated current, short-circuit duty, insulation levels, pole arrangement, operating hardware, mounting details, quantity, destination market and required documents.

Pergi ke formulir penawaran