FSC-1-1 Drop Out Fuse Cutout

FSC series drop out cutout with standard fuse link protects the transformer, capacitors, cables or lines from the short circuit and over load in 11KV~38KV overhead distribution systems.
Characteristic:
Voltage: 10~15kV
Current: 100A/200A/300A
Creepage: 220mm
Standard: IEC60282-2

Request a Quote

Overview

FSC series drop out fuse cutout

FSC-1-1 Drop Out Fuse Cutout for Overhead Distribution Protection

FSC series drop out cutout with standard fuse link protects the transformer, capacitors, cables or lines from the short circuit and over load in 11KV~38KV overhead distribution systems.

The FSC-1-1 entry publishes a 10~15 kV voltage range, 100/200/300 A current options, 50/60 Hz frequency and an 8 kA breaking-current value. Confirm the selected fuse link and accessory arrangement before ordering.

Rated voltage: 10~15 kV
Rated current: 100/200/300 A
Frequency: 50/60 Hz
Breaking current: 8 kA

The supplier page lists IEC60282-2 as the standard. Confirm the required edition and project acceptance documents before ordering.

Request a configuration review Browse fuse cutouts

Configuration and materials

Options to Confirm for FSC-1-1

The original product table separates electrical characteristics, spare parts, material choices, package details and service conditions. Use the table and drawings together when preparing a purchase specification.

Spare parts

Mounting bracket: with/without. Arc shortening rod: with/without. Arc distinguish chamber: with/without.

Fuse link supply

The source lists the fuse link as without. Confirm whether the project requires a supplied link or a buyer-provided link.

Conductive parts

The published material option is Copper with silver plated/Copper with tin plate. Confirm plating and terminal details against the project drawing.

Insulator and fuse tube

Insulator: Porcelain/Polymer. Fuse tube: Fiber glass. Confirm the required support material before quotation.

The source lists brass copper content as Brass (60~60%), one piece per carton, maximum environment temperature 40 ℃, pollution level II and altitude ≤1000 Meter. Treat these as supplier-stated values and confirm the project service conditions.

Technical parameter

FSC-1-1 Drop Out Fuse Cutout Technical Parameters

The values below reproduce the target model’s original WordPress table. Electrical coordination, fuse-link selection and final acceptance remain the buyer’s engineering responsibility.

Parameter	Specification	Unit
Rated voltage	10~15	kV
Rated current	100/200/300	A
Frequency	50/60	Hz
Power-frequency withstand to earth (1 min)	42	kV
Power-frequency withstand phase to phase (1 min)	48	kV
Impulse withstand to earth	95	kV
Impulse withstand phase to phase	110	kV
Breaking current	8	kA
Creepage distance	220	mm

Published values for FSC-1-1 are voltage 10~15 kV, current 100/200/300 A, frequency 50/60 Hz, breaking current 8 kA and creepage distance 220 mm.

Selection checklist

Prepare the FSC-1-1 RFQ

Match the system voltage. Confirm that the 10~15 kV entry suits the overhead distribution section.
Pair current and interrupting duty. Select from 100/200/300 A and verify the published 8 kA breaking-current value.
Confirm insulation values. Check 42 kV to earth, 48 kV phase to phase, 95 kV impulse to earth and 110 kV impulse phase to phase.
State the accessory set. List the mounting bracket, arc-shortening rod, arc distinguish chamber and fuse-link requirement.
Confirm the service environment. Include temperature, pollution level, altitude, packaging and destination market in the inquiry.

Drawings and supply boundary

Review the Assembly Before Quotation

Fuse cutout structure

The supplier page labels a fuse cutout structure section for this model. Use the first drawing to confirm the main bearing structure and mounting arrangement.

Fuse cutout accessories

The source lists a lower general bearing of fuse, arc extinguishing housing, American type fusible load with knife and a 300A fusible load. Confirm which accessories are included.

FSC-1-1 Drop Out Fuse Cutout structure drawing — Supplier drawing for the FSC-1-1 fuse cutout structure.

FSC-1-1 Drop Out Fuse Cutout accessories drawing — Supplier drawing for the FSC-1-1 fuse cutout accessories.

Company scale

Fuerte at a Glance

FUERTE lists 1985 as its founding year, 220+ employees and a 36,000 m² built-up area. These supplier-published figures provide context for manufacturing and project support.

1985

Founded in

Decades of manufacturing history

220+

Employees

Skilled staff and experienced engineers

36k m²

Built-up area

Supplier-published manufacturing footprint

OEM

& ODM support

Customization subject to project review

OEM & ODM capability

Custom Support for Global Markets

FUERTE’s published OEM and ODM scope includes voltage/current adaptation, mounting hardware, nameplates, packaging and shipping marks. The company also states that it develops customized solutions from technical drawings, market standards and project requirements.

Comprehensive customizationPrivate label, specification adjustment, sample development and mass production.
International experienceFUERTE states it has delivered 100+ customized designs to the USA, Saudi Arabia, Kenya, South Africa, Thailand and other markets.
Cross-category supportAdaptations are listed for fuse cutouts, lightning arresters, isolating switches and related fittings.

Frequently asked questions

FSC-1-1 Fuse Cutout FAQ

What voltage and current values are published?

The source lists 10~15 kV, 100/200/300 A and 50/60 Hz for this model. Confirm the exact fuse-link and accessory arrangement in the quote request.

What insulation values should be checked?

Check 42 kV power-frequency withstand to earth, 48 kV phase to phase, 95 kV impulse to earth and 110 kV impulse phase to phase.

What does the standard field show?

The original table shows IEC60282-2. Confirm the required edition and project acceptance documents before ordering.

What should be included in a quote request?

Confirm model, current, fuse-link arrangement, mounting bracket, spare parts, service conditions, quantity, packaging and destination market.

Configuration review

Send the FSC-1-1 Requirements

For an accurate review, provide voltage, current, breaking duty, insulation values, creepage distance, mounting bracket, fuse-link arrangement, order quantity and destination market.

Go to the quote form