{"id":1936,"date":"2026-07-21T02:00:00","date_gmt":"2026-07-21T02:00:00","guid":{"rendered":"https:\/\/cnfuerte.com\/?p=1936"},"modified":"2026-10-20T03:05:03","modified_gmt":"2026-10-20T03:05:03","slug":"metal-oxide-vs-silicon-carbide-arresters","status":"publish","type":"post","link":"https:\/\/cnfuerte.com\/id\/blog\/metal-oxide-vs-silicon-carbide-arresters\/","title":{"rendered":"Penangkal Petir dari Logam Oksida vs Karbida Silikon: Perbandingan Teknis"},"content":{"rendered":"

Distribution networks that have been in service for several decades usually carry two generations of overvoltage protection side by side. New purchases are almost always based on the metal oxide lightning arrester, a gapless design built around zinc oxide varistor blocks, while many older structures still carry gapped silicon carbide units from earlier programs. Buyers meet both families in audits, renewals, and spare-parts requests, so the difference between them is a practical procurement topic rather than a history lesson.<\/p>\n

This comparison explains how each design is built, why their voltage-current behavior differs, and which questions belong in a replacement inquiry. It does not select an arrester for a specific transformer, substitute for an insulation-coordination study, or certify any product for a project.<\/p>\n

Why do older networks contain both arrester technologies?<\/h2>\n

Silicon carbide arresters served as the standard line and equipment protection for much of the twentieth century. Industry references such as the Wikipedia surge arrester<\/strong> overview<\/a> describe how manufacturers then moved to gapless metal-oxide designs once zinc oxide varistor technology matured, and most new medium-voltage purchases now follow that later generation. For a related technical topic, see Gapless vs Gapped Surge Arresters: Pertimbangan Pemilihan untuk Sistem MV<\/a>.<\/p>\n

Networks do not change out protective devices all at once. A feeder rebuilt last year may carry gapless metal-oxide units next to a pole section that still holds gapped silicon carbide arresters from an older program, which is exactly why renewal planning needs a clear picture of both designs.<\/p>\n

For family-level orientation on current gapless products, the FUERTE lightning arrester range<\/a> shows the medium-voltage distribution families this article uses as product context.<\/p>\n

How is a gapped silicon carbide arrester built?<\/h2>\n

A gapped silicon carbide arrester stacks two kinds of elements inside one housing: a set of series spark gaps and a column of silicon carbide blocks. Under normal operating voltage, the gaps hold off the system voltage so that almost no current flows through the blocks.<\/p>\n

\"Polymer-housed<\/figure>\n

When a lightning or switching overvoltage arrives, the gaps spark over and connect the silicon carbide column to the line. The blocks then conduct the surge to ground while limiting the voltage across the protected equipment to their discharge characteristic.<\/p>\n

Because silicon carbide is only moderately nonlinear, the blocks would keep conducting a substantial current at normal system voltage once the gaps have fired. The series gaps therefore carry a second duty: after the surge passes, they must interrupt the power-frequency current that continues to flow, and many designs added grading components to share voltage across the gap stack for that purpose.<\/p>\n

How is a gapless metal-oxide arrester built?<\/h2>\n

Inside a gapless metal-oxide arrester there is essentially one active element: a column of zinc oxide varistor blocks, connected between line and ground with no series gap. Background such as the Wikipedia varistor article<\/a> explains that these ceramic blocks conduct almost nothing at continuous operating voltage yet turn strongly conductive when voltage rises.<\/p>\n

That extreme nonlinearity removes the need for spark gaps. The block column faces system voltage continuously, passes only a small leakage current in normal service, and moves into conduction directly when a surge raises the voltage across it.<\/p>\n

Construction choices then follow the application. Distribution-class units for overhead lines are commonly supplied in polymer housings with brackets, disconnectors, and earth-lead accessories, and standards context for the type sits in IEC 60099-4<\/strong>, the metal-oxide arrester standard referenced by product documentation.<\/p>\n

Why does zinc oxide limit voltage differently from silicon carbide?<\/h2>\n

The practical gap between the two generations comes down to how sharply resistance falls as voltage rises. Zinc oxide blocks are far more nonlinear than silicon carbide blocks, which changes what the rest of the device has to do.<\/p>\n\n\n\n\n\n\n\n\n\n\n
Aspect<\/th>\nGapped silicon carbide design<\/th>\nGapless metal-oxide design<\/th>\n<\/tr>\n<\/thead>\n
Active material<\/td>\nSilicon carbide blocks, moderately nonlinear<\/td>\nZinc oxide varistor blocks, highly nonlinear<\/td>\n<\/tr>\n
Series spark gaps<\/td>\nRequired to isolate blocks in normal service<\/td>\nNot required in the standard distribution design<\/td>\n<\/tr>\n
State at system voltage<\/td>\nBlocks disconnected until a gap sparkover<\/td>\nBlocks energized continuously with small leakage<\/td>\n<\/tr>\n
Surge response<\/td>\nGap sparkover, then block conduction<\/td>\nDirect transition of the blocks into conduction<\/td>\n<\/tr>\n
After the surge<\/td>\nGaps must interrupt power-frequency follow current<\/td>\nBlocks return to a high-resistance state on their own<\/td>\n<\/tr>\n
Typical status in procurement<\/td>\nLegacy installed base and renewals<\/td>\nDefault technology for new distribution purchases<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sparkover behavior also shapes protection quality. A gapped design only starts limiting voltage after its gaps fire, while a gapless metal-oxide unit begins conducting as the voltage climbs, without waiting for a sparkover event.<\/p>\n

None of this table assigns ratings to a specific product. Rated voltage, continuous operating voltage, and discharge parameters remain SKU-level data that must come from the exact product page or quotation documents.<\/p>\n

Why must silicon carbide arresters interrupt follow current?<\/h2>\n

Follow current is the power-frequency current that keeps flowing through a fired gap stack and its silicon carbide column after the surge has passed. Every operation therefore ends with an interruption duty, and the gaps must clear that current at a natural current zero to return the arrester to standby.<\/p>\n

\"YH510W-36<\/figure>\n

Over years of service, that interruption duty takes a toll. Gap erosion, moisture ingress, and sealing condition all influence whether an aging gapped unit still behaves as designed, which is one reason utilities began tracking the condition of older fleets closely.<\/p>\n

After zinc oxide varistor columns proved able to hold system voltage directly, the industry direction became clear. A design with no gaps has no follow current to interrupt, so manufacturers broadly shifted their distribution ranges to gapless metal-oxide construction, and silicon carbide units gradually left mainstream catalogs. Availability of genuinely new silicon carbide stock should be confirmed with suppliers rather than assumed.<\/p>\n

What should be checked before replacing a silicon carbide arrester?<\/h2>\n

Renewal of a silicon carbide arrester is a review, not a like-for-like swap. The two technologies describe their duty with different terms, so the replacement inquiry should restate the application data instead of copying an old nameplate line by line.<\/p>\n\n\n\n\n\n\n\n\n\n
Replacement question<\/th>\nMengapa hal ini penting<\/th>\nEvidence to collect<\/th>\n<\/tr>\n<\/thead>\n
What are the system voltage and earthing arrangement?<\/td>\nContinuous-voltage duty for a gapless unit follows from the system, not from the old nameplate alone<\/td>\nSystem data confirmed by the network owner<\/td>\n<\/tr>\n
Which equipment does the arrester protect?<\/td>\nProtection distance and lead routing depend on the installed position<\/td>\nPole or bay drawing with the mounting point<\/td>\n<\/tr>\n
What ratings does the old unit show?<\/td>\nThe legacy nameplate is a reference input, not a selection result<\/td>\nNameplate photo plus any fleet records<\/td>\n<\/tr>\n
Which accessories must carry over?<\/td>\nBrackets, disconnectors, and earth leads differ across designs<\/td>\nSite hardware list for the affected structures<\/td>\n<\/tr>\n
Who confirms the final selection?<\/td>\nRatings and coordination remain an engineering decision<\/td>\nOwner or consultant sign-off route<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

A distribution-transformer application also needs its own continuous-voltage, surge-duty and mounting review. Use the transformer data and installation drawing alongside the offered arrester characteristics.<\/p>\n

Terminology can also confuse renewal paperwork, because older documents may mix device names. One reference on the difference between surge arrester and lightning arrester is enough to align wording before an inquiry goes out.<\/p>\n

Which documents should accompany a metal-oxide arrester enquiry?<\/h2>\n

Buyers who need current gapless product context can use the YH510W-36 \/ YH510W-36J \/ YH510W-36L surge arrester product page<\/a> as a discussion entry point. That page lists a rated voltage of 36 kV, a maximum continuous operating voltage of 29 kV, nominal discharge current options of 5 kA and 10 kA, gapless zinc oxide construction in a polymer housing, and IEC 60099-4:2014 as the referenced standard for this family.<\/p>\n

Those values describe the published family data only. They do not establish fit for a particular feeder, duty class, or project, and this article makes no test, certification, lifetime, or protection-outcome claims for any SKU; this is product context rather than a universal product recommendation.<\/p>\n

To move from comparison to quotation, send the system voltage, earthing arrangement, requested ratings, installation context, quantity, and documentation requirements through the FUERTE contact route. A complete inquiry lets the supplier state assumptions clearly and flag anything that still needs owner confirmation.<\/p>\n

FAQ<\/h2>\n

How does a metal oxide lightning arrester differ from a silicon carbide arrester?<\/h3>\n

The metal-oxide design uses highly nonlinear zinc oxide blocks that connect to the line with no series gap, while the silicon carbide design needs spark gaps to isolate its less nonlinear blocks in normal service. The gapless unit also has no power-frequency follow current to interrupt.<\/p>\n

Why do silicon carbide arresters need series spark gaps?<\/h3>\n

Silicon carbide blocks would conduct a significant current at normal system voltage if they were connected directly. The gaps hold the blocks off the line until an overvoltage causes sparkover, and they interrupt the current that continues after the surge.<\/p>\n

What is follow current in a gapped arrester?<\/h3>\n

Follow current is the power-frequency current that keeps flowing through the fired gaps and blocks after the surge has been discharged. The gap stack must clear this current at a current zero before the arrester returns to standby.<\/p>\n

Are silicon carbide arresters still manufactured?<\/h3>\n

Mainstream distribution ranges moved to gapless metal-oxide construction, and silicon carbide units now appear mostly as legacy installed base. Availability of new silicon carbide stock varies, so confirm it directly with suppliers instead of assuming catalog coverage.<\/p>\n

Can a metal-oxide arrester replace a silicon carbide unit one for one?<\/h3>\n

Not automatically. The renewal review should restate system voltage, earthing, protected equipment, mounting, and accessory requirements, because the two technologies describe their duty differently and the old nameplate is only an input.<\/p>\n

Does this comparison replace transformer arrester selection work?<\/h3>\n

No. Transformer-specific selection, including continuous operating voltage and energy review, belongs to the linked transformer-selection guide and to project engineering. This page only explains the technology difference.<\/p>\n

What information supports a metal-oxide arrester inquiry?<\/h3>\n

Provide the system voltage and earthing arrangement, the requested ratings, the installation context, quantities, and the documentation you expect with delivery. Product pages supply family-level context, and the exact SKU documentation completes the review.<\/p>\n

Which system and installation details should the RFQ record?<\/h3>\n

For a silicon-carbide replacement, identify the legacy arrester construction and recorded duty before evaluating a metal-oxide alternative. Confirm system conditions, the protected equipment and installation interfaces. A newer technology is not automatically an interchangeable replacement.<\/p>\n

Does MCOV by itself select a metal-oxide arrester?<\/h3>\n

No. MCOV helps describe continuous-voltage duty for the proposed design, but a silicon-carbide renewal also needs temporary-overvoltage and coordination review. Compare the relevant characteristics and installation limits rather than matching only the old rated-voltage label.<\/p>\n

Why should lead routing appear in the arrester review?<\/h3>\n

Keep the old and proposed installation arrangements distinct during a silicon-carbide renewal. Check terminal positions and earthing geometry; a replacement with similar external dimensions can still require a different mounting or lead arrangement.<\/p>\n

Ringkasan<\/h2>\n

Metal-oxide and silicon-carbide arresters differ in their nonlinear elements, use of gaps and management of follow current. That distinction explains their operating behaviour, but it does not make every metal-oxide unit a direct replacement for a legacy silicon-carbide arrester. Record the old equipment identity and duty, then review the proposed design against the present system conditions and protected equipment. Include mounting, terminals and the earth path in the comparison. A renewal decision should rest on the complete coordination and interface review, with limitations documented, rather than on technology preference or matching the former voltage label.<\/p>\n

Referensi<\/h2>\n