{"id":1871,"date":"2026-07-10T10:52:43","date_gmt":"2026-07-10T10:52:43","guid":{"rendered":"https:\/\/cnfuerte.com\/blog\/disconnector-switch-selection-guide-for-medium-voltage-overhead-lines\/"},"modified":"2026-09-28T08:29:37","modified_gmt":"2026-09-28T08:29:37","slug":"disconnector-switch-selection-guide-for-medium-voltage-overhead-lines","status":"publish","type":"post","link":"https:\/\/cnfuerte.com\/id\/blog\/disconnector-switch-selection-guide-for-medium-voltage-overhead-lines\/","title":{"rendered":"Disconnector Switch Selection Guide for Medium-Voltage Overhead Lines"},"content":{"rendered":"
\n

When a distribution engineer in Pune opened a new pole-top disconnector during a planned feeder outage, the handle moved but the line did not show the expected isolation point. The crew found a device specified for visible isolation, while the switching schedule assumed load interruption; the root cause was selection and duty definition, not simply a defective product. That distinction matters on every medium-voltage overhead line.<\/p>\n

Ringkasan:<\/strong> Select a disconnector by its actual duty first: visible isolation is different from load breaking or fault interruption. Confirm maximum system voltage, continuous current, short-time withstand, insulation coordination, interlocking, earthing, environmental exposure, and the utility’s operating procedure before comparing quotations. IEC 62271-102:2018 covers alternating-current disconnectors and earthing switches; it does not turn every disconnector into a circuit breaker. Put the switching duty, site conditions, inspection evidence, and acceptance tests in the RFQ, then ask the supplier to show how each requirement is met.<\/p>\n