NT/NH/Knife Blade Fuse Link

Size:NT00C(NH00C), NT00(NH00),NT1(NH1),NT2(NH2),NT3(NH3),MNT4(NH4).

Permintaan Penawaran

Ringkasan

Other electrical products

NT/NH/Knife Blade Fuse Link for Project Requirements

NT/NH/Knife Blade Fuse Link is a supplier-listed electrical accessory or protection component. The authenticated product source below is retained as the technical starting point; confirm the exact variant and installation requirements before ordering.

Product category: Electrical component
Model reference: NT/NH/Knife Blade Fuse Link
Technical data: Source-specific
Final selection: Confirm by drawing

Use the exact target product source and approved project documents for final selection. Ratings, dimensions, compatibility, material and applicable standards remain subject to technical review where not published.

Permintaan tinjauan konfigurasi Browse other products

Published product data

NT/NH/Knife Blade Fuse Link Source Details

The block below preserves information published on the target product listing. It is a starting point for engineering review, not a substitute for an approved project drawing.

Published source notes

Product Features

◆Standard: IEC60269,DIN43620

◆Rated Voltage: AC 500V/690V or DC 440V; Exception:Size 00 with DC 250V

◆Rated Current: 2A~1250A

◆inely graduated selectivity

◆Rated breaking capacity: AC 120kA (Size 00: AC 50kA)

◆Operating class:

gL/gG for cable and conductor protection

aM for motor protection

aR for semiconductor protection

Fuse base for NT/NH fuse link is also manufactured.

Size:NT00,NT1, NT2, NT3, NT4.

Confirm the exact model, unit, test condition and drawing revision before placing an order. Do not transfer a value or interface from a similar-looking product.

Checklist seleksi

Specify the Product for Its Intended Duty

Define the product function. State the equipment it connects to and the protection, switching, indication or accessory role required.
Confirm electrical compatibility. Provide the system voltage, current, frequency, insulation level and any short-circuit duty that applies.
Check the mechanical interface. Confirm mounting position, terminal or fitting interface, dimensions, cable connection and enclosure requirements.
Describe the service environment. State indoor or outdoor location, pollution, temperature, altitude, humidity and corrosion conditions.
List documents and quantity. Include drawings, marking, packing, destination market and required project documents in the RFQ.

Configuration and supply boundary

Review the NT/NH/Knife Blade Fuse Link Configuration

This listing may cover a product family or project-specific configuration. State the exact requested function and interface so the quotation does not mix similar accessories or protection components.

Electrical fit

Confirm system parameters, insulation coordination, control or indication circuit requirements and any protection duty.

Mechanical fit

Specify mounting, terminals, hardware, dimensions and compatibility with the connected equipment.

Environment and documents

State installation conditions, required drawings, test evidence, marking and destination-market requirements.

Commercial boundary

Quantity, packing, delivery schedule, private label and project documents depend on technical review and quotation.

Bengkel produksi yang ditampilkan di FUERTE Tentang Kami

Lingkungan pengujian yang ditampilkan di FUERTE Tentang Kami

Skala perusahaan

Fuerte dalam Sekilas

FUERTE mencatat tahun pendiriannya sebagai tahun 1985, dengan 220+ karyawan dan area bangunan seluas 36.000 m². Angka-angka yang dipublikasikan oleh pemasok tersebut memberikan konteks terkait dengan manufaktur dan dukungan proyek.

Operasi pabrik
Pengujian & Inspeksi
Dukungan ekspor

1985

Didirikan pada

Supplier-published company history

220+

Karyawan

Published workforce scale

36,000 m²

Total luas bangunan

Published manufacturing footprint

OEM

& Dukungan ODM

Subject to technical review

Tentang FUERTE

Kemampuan OEM & ODM

Custom Support for Electrical-Component Projects

FUERTE’s published OEM and ODM scope includes voltage/current adaptation, mounting hardware, nameplates, packaging and shipping marks.

Product configurationReview function, system compatibility, service conditions and project-specific requirements.
Mechanical interfaceConfirm fittings, mounting dimensions, terminals and equipment interface.
Project documentationState drawings, marking, packing, shipping marks and acceptance-document requirements before quotation.

Pertanyaan yang sering diajukan

NT/NH/Knife Blade Fuse Link FAQ

What should be confirmed first?

Start with the product function, system compatibility, electrical duty, installation interface and service environment.

Can data be borrowed from a similar product?

No. Confirm the exact target model and approved drawing before using a rating, dimension or interface in a purchase specification.

Can fittings, marking or packing be reviewed?

FUERTE publishes adaptation of mounting hardware and project specifications as an OEM/ODM scope. Availability depends on technical review.

Apa yang harus disertakan dalam permintaan penawaran?

State the product function, compatible equipment, drawings, ratings, interface, quantity, destination and required documents.

Ulasan konfigurasi

Send the NT/NH/Knife Blade Fuse Link Requirements

Provide the product function, system conditions, interface, drawings, quantity, destination market and required documents.

Pergi ke formulir penawaran

Permintaan Penawaran Khusus

Tertarik dengan produk ini? Lengkapi formulir di bawah ini dan tim penjualan kami akan menghubungi Anda dalam waktu 24 jam.

Produk Lainnya